COMPENSATORS

Model HPFF3

3" compression, copper sweat ends

This expansion joint is designed for axial movement only. Pipe must be properly guided and anchored per the recommendations of the Expansion Joint Manufacturers Association.

 HPFF

HPFF3 - Copper Body, 304 Stainless Steel Bellows

PART NO. Pipe Size Pressure / Temp Compression Extension Effective Area
(in2)		 Spring Rate
(lbs/in)		 Weight 3D Drawing
HPFF30075 .75" 150 PSIG at 500 deg F. 3" 0.5" 1.1 58 1 Revit/CAD
HPFF30100 1" 150 PSIG at 500 deg F. 3" 0.5" 1.7 63 1.5 Revit/CAD
HPFF30125 1.25" 150 PSIG at 500 deg F. 3" 0.5" 2.4 54 2 Revit/CAD
HPFF30150 1.5" 150 PSIG at 500 deg F. 3" 0.5" 3.2 52 3 Revit/CAD
HPFF30200 2" 150 PSIG at 500 deg F. 3" 0.5" 5.1 118 4 Revit/CAD
HPFF30250 2.5" 150 PSIG at 500 deg F. 3" 0.5" 7.6 110 5 Revit/CAD
HPFF30300 3" 150 PSIG at 500 deg F. 3" 0.5" 10.6 175 6 Revit/CAD
HPFF30400 4" 150 PSIG at 500 deg F. 3" 0.5" 17.9 241 12 Revit/CAD

HPFF3

CAUTION: Silver Brazing used in construction. Do not exceed 1000° F during installation.

Design Data:Temp. 400° F Press. 150 PSI • Test Press. 225 PSI • 3" Compression • 1/2" Expansion
The Metraflex Company, 2323 W. Hubbard Street, Chicago, IL 60612 | 800-621-4347 | 312-738-3800 | Fax 312-738-0415 | Email for information.
Copyright © 2000-2012 Metraflex, Inc.  Metraflex, Metraloop, Fireloop and Cablesphere are registered trademarks of The Metraflex Company.
All Rights Reserved