RUBBER EXPANSION JOINTS AND PUMP CONNECTORS

Flexible Rubber Pipe

Quiet! Our traditional, extremely flexible rubber pipe reduces noise and vibration from pumps, chillers and other equipment.

Metraflex Flexible Rubber Pipe is used primarily to suppress noise and vibration from pumps, chillers and other rotating equipment. It also inhibits electrolysis, water hammer and corrosion. It will accommodate minimum amounts of movement.

Flexible Couplings

Flexible Rubber Hose

Back to Non-Metalic Joints/Connectors Page
Back To Expansion Joint Page

Rubber Pipe – pressure/temp: 150 PSI at 250°F.
MODEL# PIPE
SIZE
LENGTH MATERIAL BACKUP
RINGS
ID(in.) (in.)
400HT015012 1-1/2 12 Chlorobutyl & Nylon Split
400HT015018 1-1/2 18 Chlorobutyl & Nylon Split
400HT020012 2 12 Chlorobutyl & Nylon Split
400HT020018 2 18 Chlorobutyl & Nylon Split
400HT025016 2-1/2 12 Chlorobutyl & Nylon Split
400HT025018 2-1/2 18 Chlorobutyl & Nylon Split
400HT030012 3 12 Chlorobutyl & Nylon Split
400HT030018 3 18 Chlorobutyl & Nylon Split
400HT040012 4 12 Chlorobutyl & Nylon Split
400HT040018 4 18 Chlorobutyl & Nylon Split
400HT050012 5 12 Chlorobutyl & Nylon Split
400HT050018 5 18 Chlorobutyl & Nylon Split
400HT060012 6 12 Chlorobutyl & Nylon Split
400HT060018 6 18 Chlorobutyl & Nylon Split
400HT080012 8 12 Chlorobutyl & Nylon Split
400HT080018 8 18 Chlorobutyl & Nylon Split
400HT100012 10 12 Chlorobutyl & Nylon Split
400HT100018 10 18 Chlorobutyl & Nylon Split
400HT120018 12 18 Chlorobutyl & Nylon Split
400HT120024 12 24 Chlorobutyl & Nylon Split
400HT240018 24 18 Chlorobutyl & Nylon Split
400HT240018 24 24 Chlorobutyl & Nylon Split

Back to top

Flexible Couplings

No flanges? Clamp it on. It's fast and clean. Just tighten the clamps and you're done.

Metra 201 requires no flanges or welding, which allows for quick disconnects. It is slipped over standard weight steel pipe and secured with T-bolt clamps. Construction is of neoprene and nylon with internal and external stainless steel rings to withstand pressure and vacuum. The maximum temperature is 225°F.

  Flexible Couplings  
 

Flexible Couplings
Pressure/vacuum/temp: 75 PSI/20 in. Hg/225°F
Compression: Up to 1-in.
Elongation: Up to 1/2-in.
Angular movement: Up to 10 degrees

MODEL # PIPE I.D. LENGTH JOINTSIZE I.D. GROSSWT.
(in.) (in.) (in.) (lbs.)
2010200 2 7 2-3/8 1.6
2010250 2-1/2 7 2-7/8 1.8
2010300 3 7 3-1/2 2.0
2010400 4 7 4-1/2 2.4
2010500 5 7 5-5/8 2.9
2010600 6 7 6-5/8 3.4
2010800 8 7 8-5/8 4.3
2011000 10 7 10-3/4 5.1
2011200 12 7 12-3/4 6.7

*For larger sizes, contact factory
**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working
pressures are also available.

Back to top