LPD Y Strainer Energy Savings Calculator

Enter Your Dimensions.

Enter your pipe size

Inches

Enter your flow rate

GPM

or

FPS

Enter your pump efficiency

Group 8 Copy 2 Created with Sketch.

Pump Efficiency

A good, new end suction pump is operating around 76%. Your pump curve will show your efficiency.

%

Enter your motor efficiency

Group 8 Copy 2 Created with Sketch.

Motor Efficiency

Most new motors run somewhere near 85%. A good number for an older motor is 70%

%

Hours of operation / year

Group 8 Copy 2 Created with Sketch.

Hours of Operation

365 days x 24 hours= 8760hrs/year. A pump just running during a 40 hour work week would see 2080 hours / year

Hours

Your cost per kWh

Group 8 Copy 2 Created with Sketch.

Cost/kW

As a point of reference, a 2014 nationwide average was reported as $ 0.12 / kwh. Read More Group 3 Copy 3 Created with Sketch.

$

How much debris

Group 8 Copy 2 Created with Sketch.

Debris

The size of a LPD Y Strainer screen is much larger than a conventional Y Strainer. The same amount of debris in each would actually block a much smaller percentage of the LPD Y strainer screen. To visualize the amount of debris in the strainer screen, we have chosen to use areas equivalent to the size of a dollar bill, 16.0254 square inches. The area we used for the conventional screen is the published area of a leading Y Strainer manufacturer.

Please contact Metraflex for applications greater than 15 feet per second. Call 312-738-3800; 800-621-4347.

To help visualize the amount of debris, we use a size equivalent to a US $1 bill: 16.0254 sq. in. (1003.39 sq. cm.)

Group 19 Created with Sketch. Show Me The Math

Old Y
Strainer
LPD Y
Strainer
Cv* 0 0
Pressure drop (psi) 0 0
Screen area (sq. in.) 0 0
% of clogged area 0 0
HP Required 0 0
kW Required 0 0
Total kWh 0 0
Annual electricity cost $0 $0

An LPD Y Strainer saves

$0 0

kWh

Per Year

*Cv is the number of U.S. gallons/minute of 60 degF water that will flow through a strainer with 1psi pressure dorp across the strainer.

Show Me The Math

LPD Math Breakdown

1714 = Conversion factor from gmp-psi to horsepower

kW input = electrial hp input *0.7457

0.7457 = Conversion factor from horsepower to kilowatts

Total Annual Cost = kW input *electrical rate ($/kWh)*

Watch it Work! See how the LPD Y-Strainer from Metraflex can Save you Money.

Be Sure to Take a Look at Our Other Calculators:

Globe vs Wafer Energy Savings Calculator

Calculate Savings Group 3 Copy 3 Created with Sketch.

MetraSeal and Off Center Seal Creator

Build Your Seal Group 3 Copy 3 Created with Sketch.

Learn More About the LPD Y Strainer

Learn More
Rep icon Your Local Rep