Exhaust Piping Expansion Joints by Metraflex

- Industry Links
- Articles

Exhaust Piping Expansion Joints for engine exhaust systems up to 1,200°F

Expansion compensation and vibration isolation for engine exhaust systems from the silencer to the roof

Providing expansion compensation and vibration isolation for engine exhaust systems should be thought of as two unique and different segments. One is the piping from the silencer to the roof. The other is the connection between the engine manifold and the silencer or muffler.

Exhaust piping

The exhaust piping is typically long pipe runs from the silencer through to the roof or thru a nearby wall. Here the issue is the large thermal expansion of the long runs due to the high temperatures. Expansion joints designed for axial compression or lateral offset are required.

Manifold bellows

This is the section from the engine's exhaust manifold to the silencer. This section experiences high engine vibration and the highest temperatures. Bellows in this section are used primarily to isolate the engine vibration. The run between engine and silencer is so short, there is very little thermal growth. However, because each engine manufacturer has it's own unique flange connection to the manifold, the make and model of the engine is needed to specify the correct manifold bellows end connections.

Metraflex provides the expansion joints/bellows for both applications. Contact Metraflex for assistance in selecting the right Exhaust Expansion Joints and Manifold Bellows for your application.

	Manifold Bellows, Flexible Joints for engine exhaust systems Provide expansion compensation and vibration isolation between the engine manifold and the muffler.
	Accessories Rain caps available for a variety of applications. Contact Metraflex for the exact cap style you need.
	Gaskets & Bolt Kits Non Asbestos, Graphite or Mica gaskets available for different temperature ranges. Carbon or s/s nuts and bolts. Contact Metraflex for the exact cap style you need.