Model PA Anchor Clamp

anchor-PA-bg

Lightweight anchor for low load

Light weight anchor for low load. This anchor is ideal for the Metraloop expansion joint or other “no thrust” expansion joints. Clamps to pipe.

Model PA Anchor Clamp Model Selection Chart

PIPE SIZE A B C D E BOLT HOLE WEIGHT (LBS.) SUBMITTAL
3/4″ 2-1/8″ 3-3/8″ 3-5/8″ >2-3/4″ 4 5/8″ 3 Submittal
1″ 2-1/8″ 3-3/8″ 3-5/8″ 2-3/4″ 4 5/8″ 3
1-1/4″ 2-3/8″ 3-3/8″ 3-5/8″ 2-3/4″ 4 5/8″ 3
1-1/2″ 2-1/2″ 3-3/8″ 4-5/8″ 2-3/4″ 4 5/8″ 4
2″ 2-3/4″ 3-3/8″ 4-5/8″ 2-3/4″ 4 5/8″ 4
2-1/2″ 3″ 3-3/8″ 5-5/8″ 2-3/4″ 4 5/8″ 4
3″ 3-1/4″ 4-1/8″ 5-5/8″ 2-3/4″ 4 5/8″ 4
4″ 3-1/2″ 5-1/8″ 7-1/4″ 2-3/4″ 4 5/8″ 5
5″ 4-1/2″ 5-7/8″ 8-1/2″ 4 6 3/4″ 7
6″ 5″ 6-1/4″ 8-1/2″ 4 6 3/4″ 8
8″ 6″ 6-3/4″ 10-7/8″ 4 6 3/4″ 9
10″ 7″ 7-3/4″ 12-5/8″ 4 6 3/4″ 14
12″ 8″ 8-1/8″ 14-3/4″ 4 6 3/4″ 16

Notes: Material – Carbon Steel. Finish – One Coat of Paint.