Metraflex Design and Installation Videos

Conditioning fluid flow to help your pump run more efficiently

Introducing the CRV Flex, a product installed on the suction side of the pump. The CRV Flex conditions flow so it enters the pump with a flat velocity profile, eliminating the need for a suction diffuser.

Watch Video

How to improve the performance of your pump package in a commercial piping system

By adding the Vane Flex to the discharge side of your pump, you immediately straighten flow exiting a pump or elbow, eliminating valve flutter and pre-mature seat wear.

Watch Video

How to properly install a silent check valve

The right silent check valve can minimize pressure drops and water hammer. Here is how to properly install a check valve, using the right gasket, flange and bolts.

Watch Video

Selecting and installing the MetraSeal wall penetration seal

A mechanical seal that fills the gap between a pipe and the hole in the wall is a more secure, longer lasting solution. Here is how to measure, find the size you need, and install the seal.

Watch Video

How to fill an uneven gap with a wall penetration seal

When a pipe is not centered in a wall penetration, the Metraseal Eccentric Seal mechanical wall penetration seal will fill the gap. See how to take and get a custom belt of mechanical links that will perfectly fill the gap.

Watch Video

How to guide risers and reduce noise and vibration. And how to condition fluid flow and prevent pre-mature valve failure.

The Glide riser guide secures tot he floor and/or ceiling to properly guide risers, plus it significantly 97% of pipe-borne noise. Plus learn how the VaneFlex connector straightens flow and prevents damage to valves.

Watch Video

Vane Flex pump connector comparison

Milwaukee School of Engineering comparison study compares flow conditioning performance of straight pipe vs. standard pump connector vs. Vane Flex pump connector.

Watch Video