Model HPFF3 Compensator
The HPFF3 is an externally pressurized expansion compensator that has several advantages over other in-line bellows joints. Since the pressure is on the outside of the bellows, more corrugations can be added to the design resulting in a joint capable…
The HPFF3 is an externally pressurized expansion compensator that has several advantages over other in-line bellows joints. Since the pressure is on the outside of the bellows, more corrugations can be added to the design resulting in a joint capable of more movement. The design features pipe that acts as a liner and a casing that acts as a cover to protect the bellows from damage. An internal guide makes this a stable, rugged joint.
All inline bellows expansion joints develop anchor loads and require guiding. Refer to the design guide or consult Metraflex or your local representative for more information.
- Conforms to MIL-DTL-17813H
- Maximum Working Temperature 400°F
- Maximum Working Pressure 150 PSI
- Maximum Test Pressure 225 PSI at 70°F
- Body 304 Stainless Steel
- Bellows 2-Ply 304 Stainless Steel
- End fittings Copper Female Sweat Ends
- CAUTION: Silver brazing used in construction. Do not exceed 1000°F during installation. Avoid flux exposure to the stainless-steel components of the HPFF3.
HPFF3 - Copper Body, 304 Stainless Steel Bellows
|PART NO.||Pipe Size||Pressure / Temp||Compression||Extension||Effective Area|
|HPFF30075||.75″||150 PSIG at 400 deg F.||3″||0.5″||1.1||58||1||Revit/CAD|
|HPFF30100||1″||150 PSIG at 400 deg F.||3″||0.5″||1.7||63||1.5||Revit/CAD|
|HPFF30125||1.25″||150 PSIG at 400 deg F.||3″||0.5″||2.4||54||2||Revit/CAD|
|HPFF30150||1.5″||150 PSIG at 400 deg F.||3″||0.5″||3.2||52||3||Revit/CAD|
|HPFF30200||2″||150 PSIG at 400 deg F.||3″||0.5″||5.1||118||4||Revit/CAD|
|HPFF30250||2.5″||150 PSIG at 400 deg F.||3″||0.5″||7.6||110||5||Revit/CAD|
|HPFF30300||3″||150 PSIG at 400 deg F.||3″||0.5″||10.6||175||6||Revit/CAD|
|HPFF30400||4″||150 PSIG at 400 deg F.||3″||0.5″||17.9||241||12||Revit/CAD|