Metrasphere

metrasphere-bg

Rubber Expansion Joint/Pump Connector Most widely used elastomeric connector

Can your engineered pipe system stand the pressure? Protect pumps from temperature and pressure changes, and reduce noise and vibration, with Metrasphere. Our Metrasphere joint/flexible connector handles up to 225 PSI at 170° F and can work at temperatures up to 230° F!

The Metrasphere is the most widely applied expansion joint/flexible connector in the industry today. It provides the greatest pressure, temperature and movement, at a very reasonable cost. The Metrasphere’s resiliency also helps control pulsation shocks and noise transmission.

Constructed of neoprene* and nylon (other materials are available see charts below), the spherical shape allows pressure to exert itself uniformly in all directions, thus reducing the force exerted on pipe lines and equipment. Bias-ply tire cord provides strength, a high safety factor, and low force to move. Precision molding provides a dense, uniform carcass.

Solid plate steel flanges grip the sealing area and provide a fluid tight connection. All flanges are tapped or drilled to mate with 150# companion flanges. The tapped bolt holes and rotatable flanges make installation easy. The arch is self-cleaning, thus eliminating the need for filled arch when solids are present in the stream.

 

Style O - EPDM body, drilled bolt holes

Metrasphere Style O – EPDM body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
HOLE
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 5 Revit/CAD Submittal
MSODEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 6 Revit/CAD
MSODEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 7 Revit/CAD
MSODEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 0.75 8 Revit/CAD
MSODEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 0.75 13 Revit/CAD
MSODEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 0.75 14 Revit/CAD
MSODEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 0.75 18 Revit/CAD
MSODEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 0.875 23 Revit/CAD
MSODEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 0.875 28 Revit/CAD
MSODEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 0.875 40 Revit/CAD
MSODEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 1.00 68 Revit/CAD
MSODEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 1.00 94 Revit/CAD
MSODEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1.125 105 Revit/CAD
MSODEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1.125 120 Revit/CAD
MSODEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1.25 125 Revit/CAD
MSODEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1.25 145 Revit/CAD
MSODEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1.375 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - EPDM body, threaded bolt holes

Metrasphere Style O – EPDM body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSOEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - EPDM body, drilled bolt holes

Metrasphere Style R – EPDM body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
HOLE
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDEE0200 2 6 225 150 100 1/2 3/8 1/2 15 0.75 8 Revit/CAD Submittal
MSRDEE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 0.75 13 Revit/CAD
MSRDEE0300 3 6 225 150 100 1/2 3/8 1/2 15 0.75 14 Revit/CAD
MSRDEE0400 4 6 225 150 100 5/8 3/8 1/2 15 0.75 18 Revit/CAD
MSRDEE0500 5 6 225 150 100 5/8 3/8 1/2 15 0.875 23 Revit/CAD
MSRDEE0600 6 6 225 150 100 5/8 3/8 1/2 15 0.875 28 Revit/CAD
MSRDEE0800 8 6 225 150 100 5/8 3/8 1/2 15 0.875 40 Revit/CAD
MSRDEE1000 10 8 225 150 100 3/4 1/2 3/4 15 1.00 68 Revit/CAD
MSRDEE1200 12 8 225 150 100 3/4 1/2 3/4 15 1.00 94 Revit/CAD
MSRDEE1400 14 8 225 150 100 3/4 1/2 3/4 15 1.125 105 Revit/CAD
MSRDEE1600 16 8 225 150 100 3/4 1/2 3/4 15 1.125 120 N/A
MSRDEE1800 18 8 225 150 100 3/4 1/2 3/4 15 1.25 125 N/A
MSRDEE2000 20 8 225 150 100 3/4 1/2 3/4 15 1.25 145 N/A
MSRDEE2400 24 10 225 150 100 3/4 1/2 3/4 15 1.375 165 N/A

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - EPDM body, threaded bolt holes

Metrasphere Style R – EPDM body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSREE0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSREE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSREE0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSREE0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSREE0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSREE0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSREE0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSREE1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSREE1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

**Consult factory for angular movement. Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Neoprene body, drilled bolt holes

Metrasphere Style O – Neoprene body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODNN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSODNN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODNN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODNN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODNN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODNN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODNN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODNN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODNN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODNN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODNN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODNN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODNN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODNN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODNN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODNN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODNN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Neoprene body, threaded bolt holes

Metrasphere Style O – Neoprene body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSONN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSONN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSONN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSONN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSONN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSONN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSONN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSONN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSONN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSONN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSONN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSONN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSONN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSONN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSONN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSONN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSONN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Neoprene body, drilled bolt holes

Metrasphere Style R – Neoprene body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRDNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Neoprene body, threaded bolt holes

Metrasphere Style R – Neoprene body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Butyl body, drilled bolt holes

Metrasphere Style O – Butyl body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSODBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Butyl body, threaded bolt holes

Metrasphere Style O – Butyl body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSOBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Butyl body, drilled bolt holes

Metrasphere Style R – Butyl body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRDBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Butyl body, threaded bolt holes

Metrasphere Style R – Butyl body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Nitrile body, drilled bolt holes

Metrasphere Style O – Nitrile body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSODPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style O - Nitrile body, threaded bolt holes

Metrasphere Style O – Nitrile body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD Submittal
MSOPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Nitrile body, drilled bolt holes

Metrasphere Style R – Nitrile body, drilled bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRDPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.

Style R - Nitrile body, threaded bolt holes

Metrasphere Style R – Nitrile body, threaded bolt holes

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
SUBMITTAL
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD Submittal
MSRPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

*For larger sizes, contact factory

**Consult factory for angular movement.
Viton, Hypalon, EPDM, Buna-N, etc. for larger sizes or higher working pressures are also available.