Metrasphere

Rubber Expansion Joints

The Metrasphere and Metrasphere family of joints are our most popular rubber joints.  The reason for this is that the Metrasphere offers a lot of value in a small package. The Metrasphere is most commonly used as a pump or…

Product Description

Product Highlights

Additional Resources

Submittals

Product Description

The Metrasphere and Metrasphere family of joints are our most popular rubber joints.  The reason for this is that the Metrasphere offers a lot of value in a small package.

The Metrasphere is most commonly used as a pump or equipment connector.  It can also be used as an expansion joint if EJMA guidelines are followed. Control rods are optional but recommended.

Product Highlights

  • Ideal for reducing noise and vibration in a piping system.
  • Reduces pipe stress in your system.
  • Features Floating flanges to make up for companion flanges that are not properly two holed.
  • Handles movement in all directions.
  • Available in EPDM, Neoprene, or Nitrile elastomers with nylon cord reinforcement.
  • Self-cleaning.
  • Does not require a gasket.
  • See tables for maximum temperature and pressure ratings.

Additional Resources

PDF File - Flat Copy 2 Created with Sketch.

Literature

Metraflex_Non-Metallic.pdf

Download Now Group 3 Copy 3 Created with Sketch.
PDF File - Flat Copy 2 Created with Sketch.

Control Rod Installation Instructions

Control Rod Installation Instructions for Rubber Joints

Download Now Group 3 Copy 3 Created with Sketch.
PDF Icon

Spec Sheet

Spherical rubber Connector

Download Now Group 3 Copy 3 Created with Sketch.

Submittals

PDF Icon

Style “O” EPDM body, drilled bolt holes

PDF Icon

Style “O” EPDM body, tapped bolt holes

PDF Icon

Style “R” EPDM body, drilled bolt holes

PDF Icon

Style “R” EPDM body, tapped bolt holes

PDF Icon

Style “O” Neoprene body, drilled bolt holes

PDF Icon

Style “O” Neoprene body, tapped bolt holes

PDF Icon

Style “R” Neoprene body, drilled bolt holes

PDF Icon

Style “R” Neoprene body, tapped bolt holes

PDF Icon

Style “O” Butyl body, drilled bolt holes

PDF Icon

Style “O” Butyl body, tapped bolt holes

PDF Icon

Style “R” Butyl body, drilled bolt holes

PDF Icon

Style “R” Butyl body, tapped bolt holes

PDF Icon

Style “O” Nitrile body, drilled bolt holes

PDF Icon

Style “O” Nitrile body, tapped bolt holes

PDF Icon

Style “R” Nitrile body, drilled bolt holes

PDF Icon

Style “R” Nitrile body, tapped bolt holes

METRASPHERE STYLE 'O' - EPDM BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
HOLE
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 5 Revit/CAD
MSODEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 6 Revit/CAD
MSODEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 0.625 7 Revit/CAD
MSODEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 0.75 8 Revit/CAD
MSODEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 0.75 13 Revit/CAD
MSODEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 0.75 14 Revit/CAD
MSODEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 0.75 18 Revit/CAD
MSODEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 0.875 23 Revit/CAD
MSODEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 0.875 28 Revit/CAD
MSODEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 0.875 40 Revit/CAD
MSODEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 1.00 68 Revit/CAD
MSODEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 1.00 94 Revit/CAD
MSODEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1.125 105 Revit/CAD
MSODEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1.125 120 Revit/CAD
MSODEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1.25 125 Revit/CAD
MSODEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1.25 145 Revit/CAD
MSODEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1.375 265 Revit/CAD

METRASPHERE STYLE 'O' - EPDM BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSOEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'R" - EPDM BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
HOLE
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
  170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)  
MSRDEE0200 2 6 225 150 100 1/2 3/8 1/2 15 0.75 8 Revit/CAD
MSRDEE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 0.75 13 Revit/CAD
MSRDEE0300 3 6 225 150 100 1/2 3/8 1/2 15 0.75 14 Revit/CAD
MSRDEE0400 4 6 225 150 100 5/8 3/8 1/2 15 0.75 18 Revit/CAD
MSRDEE0500 5 6 225 150 100 5/8 3/8 1/2 15 0.875 23 Revit/CAD
MSRDEE0600 6 6 225 150 100 5/8 3/8 1/2 15 0.875 28 Revit/CAD
MSRDEE0800 8 6 225 150 100 5/8 3/8 1/2 15 0.875 40 Revit/CAD
MSRDEE1000 10 8 225 150 100 3/4 1/2 3/4 15 1.00 68 Revit/CAD
MSRDEE1200 12 8 225 150 100 3/4 1/2 3/4 15 1.00 94 Revit/CAD
MSRDEE1400 14 8 125 95 35 3/4 1/2 3/4 15 1.125 105 Revit/CAD
MSRDEE1600 16 8 125 95 35 3/4 1/2 3/4 15 1.125 120 N/A
MSRDEE1800 18 8 125 95 35 3/4 1/2 3/4 15 1.25 125 N/A
MSRDEE2000 20 8 125 95 35 3/4 1/2 3/4 15 1.25 145 N/A
MSRDEE2400 24 10 125 95 35 3/4 1/2 3/4 15 1.375 165 N/A


METRASPHERE STYLE 'R" - EPDM BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSREE0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSREE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSREE0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSREE0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSREE0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSREE0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSREE0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSREE1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSREE1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'O" - NEOPRENE BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODNN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSODNN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODNN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODNN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODNN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODNN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODNN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODNN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODNN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODNN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODNN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODNN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODNN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODNN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODNN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODNN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODNN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'O" - NEOPRENE BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSONN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSONN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSONN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSONN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSONN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSONN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSONN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSONN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSONN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSONN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSONN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSONN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSONN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSONN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSONN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSONN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSONN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'R" - NEOPRENE BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRDNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'R" - NEOPRENE BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'O" - BUTYL BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSODBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'O" - BUTYL BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSOBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'R" - BUTYL BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRDBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'R" - BUTYL BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'O" - NITRILE BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSODPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSODPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSODPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSODPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSODPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSODPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSODPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSODPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSODPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSODPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSODPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSODPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSODPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSODPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSODPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSODPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'O" - NITRILE BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 Revit/CAD
MSOPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 Revit/CAD
MSOPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 Revit/CAD
MSOPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 Revit/CAD
MSOPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 Revit/CAD
MSOPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 Revit/CAD
MSOPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSOPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSOPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSOPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 Revit/CAD
MSOPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 Revit/CAD
MSOPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 Revit/CAD
MSOPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 Revit/CAD
MSOPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 Revit/CAD
MSOPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 Revit/CAD
MSOPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 Revit/CAD
MSOPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 Revit/CAD

METRASPHERE STYLE 'R" - NITRILE BODY, DRILLED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRDPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRDPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRDPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRDPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRDPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRDPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRDPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRDPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

METRASPHERE STYLE 'R" - NITRILE BODY, THREADED BOLT HOLES

Group 8 Created with Sketch.

Model # Joint
Size
ID
(in)*
FACE-TO-FACE
(in.)
PRESSURE VS.
TEMPERATURE
MOVEMENT CAPABILITY ANGULAR
(Degrees)
THREAD
SIZE
(in.)
GROSS
WT.
(lbs.)
3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 Revit/CAD
MSRPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 Revit/CAD
MSRPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 Revit/CAD
MSRPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 Revit/CAD
MSRPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 Revit/CAD
MSRPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 Revit/CAD
MSRPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 Revit/CAD
MSRPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 Revit/CAD
MSRPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 Revit/CAD

Find Your Piping Solution & More

Learn More
Rep icon Your Local Rep